Teaching the World How We Grieve: Acknowledging our grief anniversaries.

AnnaLeah and Mary

Yesterday, I had a conversation on a facebook group about grieving:  Teaching the World How We Grieve: Acknowledging our grief anniversaries.

One of the things which I had mentioned was this:

I still have many moments when I can’t believe they are really gone. And I cling to anything of theirs. In case you hadn’t noticed, writing about it and them helps me. Sewing quilts with their clothes has been catharthtic.

Just yesterday, I was in a whirl because I had to let go of a car which had been given to us after the crash to replace ours. It recently had an electrical fire and yesterday we found out that the insurance company was totaling it. It is a negative reminder of the crash/loss but it is also a connection to them that will now be gone forever. And a reminder of the many ways in which people reached out to us. I don’t even know how to describe the mess of feelings that produced. LETTING GO. . .

I had one of those clinging moments again today when my son took out some boxes from the shed and asked me if I wanted him to break them down to put in recycling. I said, “No!” — not because the boxes were in great shape but because they were ones which Mary had labeled when we were moving from Texas.

When the crash happened, we were living in a rental house, and exactly two months (the Fourth of July) after the crash, we moved into our present house. That’s when I found those boxes. There were many boxes labeled by her, but these were boxes of her college sister’s clothes left at home, and Mary was being silly and spelling her sister’s name every way she could think of.

That’s Mary for you.

little-red-hen-016 little-red-hen-023 little-red-hen-022 little-red-hen-021 little-red-hen-019 little-red-hen-018

 

When we know a person, we often know their handwriting. It is a part of them. And I couldn’t bear to throw away that part of her. She will never again write anything — even on a moving box.

little-red-hen-017little-red-hen-026

Mary with Oscar The Catsusanna mary annaleah in costumeNever forgotten

I wonder if she would think that I am being silly.

Nader 50 years later: Federal Regulation Saves Millions of Lives, But. . .

Safety Advocacy, Truck Safety

Nader wrote a blogpost about the recent 50th anniversary of the signing of the Highway Safety Act on 9/9/1966.

Fifty years ago this month (on September 9, 1966), President Lyndon Johnson signed into law the National Traffic and Motor Vehicle Safety laws that launched a great life-saving program for the American People.

I was there that day at the White House at the invitation of President Johnson who gave me one of the signing pens. In 1966, traffic fatalities reached 50,894 or 5.50 deaths per 100 million vehicle miles traveled. By 2014, the loss of life was 32,675 or 1.07 fatalities per hundred million vehicle miles traveled. A huge reduction!

This was an astounding success for a federal safety program that included mandatory vehicle-safety standards (seat belts, airbags, better brakes, tires and handling among other advances) and upgrading driver and highway-safety standards. . .

Despite, many good programs and safety standards, there is still a ways to go, according to Nader:

If the auto company bosses had liberated their own engineers and scientists and cooperated with the federal regulators, who early on were physicians and engineers, even more casualties would have been prevented.

Today, the challenges remain in the upgrading of the operational and safety aspects of motor vehicles, especially large trucks, improvements in highway infrastructure and handling drivers distracted by cell phones or under the influence. Much is being written of futuristic self-driving, autonomous vehicles. Don’t be taken in with the hype, or the arrogant reliance on algorithms. It will be many years, if ever, until the entire vehicle fleet is converted into unhackable, driverless machines.

Meanwhile, modest semi-autonomous braking systems, with drivers still at the steering wheel, are here and will improve. There will be other systems inviting the dependency of drivers which will raise questions of ultimate control of a fast-moving vehicle. . .

In conclusion, Nader has this to say:

Democracy and its result – a more just society – is not a spectator sport. People have to organize to challenge the forces of injustice.

America, are we ready to actively participate in advocating for our own safety?

Life & Death

 

“Breaking Through Power: Help Us Make Activism Great Again” Ralph Nader Conference in DC

Safety Advocacy, ,

I received an invitation in an email this morning:

If you have had enough of:

  • Vehicle Violence
  • Injustice
  • Corporate Control of Government and Media
  • Sickness Care for Profit
  • Revolving Door Governance
  • Inequality
  • Dominance of Corporate Lobbyists
  • Gun Violence
  • Crime in the Suites
  • Inadequate Care of Veterans
  • Homelessness
  • Inferior Infrastructure
  • For Profit Education
  • Military Industrial Priorities
  • Duopoly Politics
  • Etc., etc.

Attend this upcoming Conference by Ralph Nader on “Breaking Through Power” to learn how we the people can do better.

This conference aims to mobilize citizens to bring about change.

I was glad to see Vehicle Violence listed — an issue which sorely needs addressing. Actually, I had already planned on going to this conference in DC, as I have been invited to sit on a panel of tort victims — when tort law is being discussed on the final day of the conference, September 29.

Good thing. Someone needs to look out for vulnerable victims of vehicle violence
Gertie reaching for Mary ...Susanna's film

“Trucking Regulations Don’t Address Biggest Risk – Unsafe Behavior” by a husband/wife trucker team

Safety Advocacy, Truck Safety, , , , , , , ,

You will want to read this in-depth article on truck safety full of practical knowledge and insight — written by a trucker husband/wife team.

Opinion: Trucking Regulations Don’t Address Biggest Risk – Unsafe Behavior, Trucks.com, by Jeff & Linda Halling, September 8, 2016

Written by Jeff and Linda Halling, a husband-and-wife driving team based in Missouri. This is one in a series of periodic guest columns by industry thought leaders.

While the federal government is adding new trucking industry regulations — including speed limiters for big rigs and electronic logging devices for drivers — these moves don’t really address the root causes of truck crashes.

If we really want to improve safety for truckers and the motoring public, we need to focus on the base reasons for unsafe behavior. We believe better training is key — teaching drivers good work habits. That will reduce the frequency of truck crashes. . .

Read more here: Trucking Regulations Don’t Address Biggest Risk – Unsafe Behavior

jeff-and-linda-halling-photo-credit-jeff-halling

9/9/16 Motor Safety Act 50th Anniv. Miles to Go from Pres. Johnson vision of ‘cure for highway disease’

Safety Advocacy, Truck Safety, , , ,

Despite much progress in highway safety, the death toll still is rising from one year to the next. Why do we mindlessly accept it? Why don’t we rally together and conquer this dreadful enemy of innocent lives?

1a85et

September 9 marks the 50th anniversary of President Johnson’s signing of the Federal Highway Safety Act of 1966:

According to the July 15, 1966, Public Works committee report on the House version of the bill (H.R. 13290), each state must “have a highway safety program approved by the [Secretary of Commerce] . . . in accordance with uniform standards to be approved by the Secretary.” The legislation addressed a broad range of issues: driver education; licensing; pedestrian performance; vehicle registration and inspection; traffic control; highway design and maintenance; accident prevention, investigation, and record keeping; and emergency services. Congress authorized funds for distribution to the states, with a requirement that each state implement a highway safety program by December 31, 1968, or suffer a 10 percent reduction in apportioned funds. The legislation enjoyed strong, bipartisan support in the House. Chairman Fallon stated, “[This bill] continues the policy of meaningful cooperation between the States and the Federal Government on highway matters. I believe it is a firm step forward in the struggle to save lives, and I urge that we act with strong voice to put it into effect.” The measure passed the House by a vote of 318-3, and President Johnson signed the Highway Safety Act into law on September 9, 1966.

I only wish that we could get that same kind of support for the appointment of a National Traffic Safety Ombudsman and a nationwide network of  citizens active in community Traffic Safety Advocacy Groups in 2016!

Yet, according to a recent FairWarning article, Miles to Go on Highway Safety, we are far from acting as responsibly and conscientiously  as we would if we really cared about saving innocent lives from preventable vehicle violence — and that includes the oversight of “self-driving” vehicle technology development!

 

Growing list of concerns about driverless cars

Safety Advocacy,

Concerns about driverless cars pop up more often than not. Some which I read today:

  1. NHTSA creates safety vacuum: Opposing view, Clarence Ditlow, USA Today,  Driverless vehicles are a marketing marvel. But it’s not a safety miracle as the auto industry and its captive regulator, the National Highway Traffic Safety Administration, claim. In its zeal to advance driverless vehicles, NHTSA has forgotten its mission is to ensure safety, not promote gee-whiz vehicle technology to increase sales. It is an inherent conflict of interest for any agency to both promote and regulate technology. . .
  2. The other bump on path to driverless cars: Crumbling roads Richard Truett Automotive News You should take claims of self-driving cars being road-ready soon with a 50-pound bag of salt, not a grain.

    While automakers, suppliers and ride providers such as Uber race to develop and deploy the technology, one aspect of self-driving cars is not being reported on much, if at all: The nation’s infrastructure is simply not ready for cars that can drive themselves 100 percent safely, 100 percent of the time. . . 

Could a National Traffic Safety Ombudsman advocate for solutions to these and other traffic safety issues? Just sayin’. . .

17hou5

Mini Quilt with Many Memories of Mary & AnnaLeah

AnnaLeah and Mary,

After I finished the second patchwork quilt with squares of clothes worn by AnnaLeah and Mary, Jerry noticed that I didn’t know what to do with myself when sitting and watching TV at night. So he asked if I had enough of their clothes left to make a baby quilt for our grandson. I hadn’t thought that I could make anything else because I knew that there wasn’t enough to make another big quilt.

But that sounded like a good possibility. So I went to the attic and brought down the tub and, sure enough, there were enough pieces of this and that for me to start drawing 4 inch (instead of 10 inch) squares. And I’m looking forward to seeing what I can create with these.

But I will tell you this. . . it isn’t easy to cut up those clothes which they once wore. It is nothing like cutting a piece of material from the fabric store–fresh with possibilities. Every cut stirs up reminders that this was once worn by a living, loving girl who is here no more.

Mini quilt squares 013

Mary enjoyed sewing practical creative things

Whimsical Creations by Mary

AnnaLeah. . . Unrealized Creative Potential

FRONT Underrun Protection Systems (FUPS) Research; So why does Europe require this & US does not?

Safety Advocacy, Truck Safety, , ,

I have been trying to collect as much information as possible on the deadly dilemma of the truck override which occurs when a truck and car have a head-on collision.

  1. Truck tractor cabs may be equipped with a Front Underrun Protection System (FUPS)
  2. IIHS 2009 Testimony:  Research in Europe has investigated front underride guards, and the United Nations Economic Commission for Europe Regulation 93 requires such guards.  NHTSA also should require adequate front, side, and rear underride guards on new tractors and trailers. Statement before the US House Committee on Energy and Commerce, Subcommittee on Commerce, Trade, and Consumer Protection Emerging vehicle safety issues, May 18, 2009, Stephen Oesch, also contains an Attachment: Federal rulemaking on truck underride guards 
  3. CRASH COMPATIBILITY BETWEEN HEAVY GOODS VEHICLES AND PASSENGER CARS: STRUCTURAL INTERACTION ANALYSIS AND IN-DEPTH ACCIDENT ANALYSIS, Aleksandra KRUSPER & Robert THOMSON , Chalmers University of Technology, Gothenburg, Sweden
  4. FRONT UNDERRUN PROTECTION SYSTEMS FOR TRUCKS. CONSIDERATIONS ABOUT THE BULLET AND TARGET VEHICLES FOR A TEST PROCEDURE, J. Paez, M. Sanchez, Spain
  5. IMPROVED CRASHWORTHY DESIGNS FOR TRUCK UNDERRIDE GUARDS , Byron Bloch & Luis Otto Faber Schmutlzer
  6. Front Underrun or Underride Guards, Underride Network
  7. Volvo Trucks India: Protecting Other Road-Users :The different heights of trucks and cars have always constituted a safety problem in traffic, not least if a head-on collision should occur.Now, we are proud to offer a solution in the shape of Volvo’s Front Underrun Protection System (FUPS), which is fitted as standard on Volvo FH and Volvo FM models.The FUPS prevents passenger cars from becoming wedged under the truck’s front in a frontal collision, and thereby reduces the risk of serious injuries and increases the survival rate for the car’s occupants. The underrun protection beam serves as a 200 mm deep crumple zone, considerably reducing penetration into the car’s passenger compartment. With the truck bumper situated on the same level as that of a typical car bumper, the deformation zone of the car can be utilised in the best possible way.

    The FUPS comes fully integrated into the cab’s structure in the FH and FM series, but does not add any extra weight.

  8. Robustness and Reliability of Front Underrun Protection Systems, Master’s Thesis in Solid and Fluid Mechanics JOHANNES FRAMBY & DAVID LANTZ
  9. Front underrun protective systems and devices are used on heavy vehicles. Their problem of compatibility with other road users is a serious issue. Trucks are stiff, heavy and high and pose a serious threat to occupants of other vehicles in the event of an impact. Frontal car-to-truck collisions are the most common impact type in crashes where trucks are involved. . .  In EU it is mandatory for vehicles over 3.5 tonnes to have a rigid front underrun protection system. Studies have also shown that passenger cars can ‘survive’ a frontal truck collision with a speed of 75 km/h if the truck is equipped with an energy absorbing underrun protective system. In order for a Front Underrun Protective System to be approved laboratory testing has to be carried out in accordance with the procedures described in UN ECE Regulation No. 93. Tests also have to be carried out in by a test facility approved by the road agency (transport department). TEST TO FRONT UNDERRUN PROTECTIVE SYSTEMS
  10. FUPS BullbarsFront Underrun Protection Systems (FUPS) are barriers integrated into the front of trucks OR built as specially designed bullbars and bumpers.The benefits of FUPS are significant:Injuries are minimised by preventing smaller vehicles from going underneath the front of trucks in the event of an accident.
    • FUPS ensure that the crash forces are evenly distributed across the front of the truck.
    • FUPS ensure that the safety features of passenger vehicles (such as air bags and crumple zones) are activated during a collision.
    • FUPS can prevent the car damaging the trucks steering – allowing the truck to be bought to a controlled stop.

    Australian FUPS are made to UNECE Regulation No 93 Standards. The regulation requires that the Front Underrun Protection Device must withstand certain forces, have a smooth front with a face of 100mm to distribute the crash forces, and have a maximum ground clearance of 400mm.

    The fitment of a FUPS is one of the requirements to operate a 26 metre B-Double within Australia. Provided the truck has the cab strength required this may also enable you to have an extra 500kg on the front axle.

  11. Front underrun protection systems for trucks. Considerations about the bullet and target vehicles for a test procedure
  12. Front underrun protection European Commission, Transport, Road SafetyDue to the size and mass of heavy vehicles, the problem of compatibility with other road users is a serious issue. Trucks are stiff, heavy and high and pose a serious threat to occupants of other vehicles in the event of an impact. Frontal car-to-truck collisions are the most common impact type in crashes where trucks are involved.It has been estimated that energy-absorbing front, rear and side under-run protection could reduce deaths in car to lorry impacts by about 12% [100]. An EU requirement was introduced in 2000 based on ECE Regulation 93 requiring mandatory rigid front underrun protection defining a rigid front underrun protection system for trucks with a gross weight over 3.5 tonnes Directive 2000/40/EEC. Studies performed by EEVC WG 14 have shown that passenger cars can ‘survive’ a frontal truck collision with a relative speed of 75 km/h if the truck is equipped with an energy absorbing underrun protection system. Furthermore, these systems could reduce about 1,176 deaths and 23,660 seriously injured car occupants in Europe per year. Research shows that the benefits of a mandatory specification for energy absorbing front underrun protection would exceed the costs, even if the safety effect of these measures was as low as 5% [37]. Energy absorbing systems are available from all truck manufacturers as an optional device but almost none are sold. A test procedure for legislative action is under development VC Compat.
  13. Front underrun protection The front underrun protection prevents smaller vehicles in frontal crashes from being dragged under the body of a large truck. In its function as a high-strength steel abutment, it activates the energy-absorbing areas of the body of the advancing vehicle (crumple zones) so that the energy of the collision can be dissipated.
  14. In head-on collisions of bonnet-type cars (sedans, wagons, hatchbacks, etc., hereafter referred to simply as cars) and heavy trucks, the car often under runs the front of the truck, and the car crew received the serious or fatal injuries. The crash safety performance of the car depends on the way its structural parts interact with the structural parts of the truck. Front Underrun Protection Device equipment that prevents the car from under running the truck is obligatory in India. The Required strength and ground clearance of FUPDs are specified in the relevant regulations used in India. Accidents between cars and trucks are among the most fatal accidents because of the car under running. This phenomenon leads to serious and fatal injuries for car occupants because of intrusion of the car structure into the passenger compartment. This has led to the development of test procedure for energy-absorbing front under run protection systems for trucks. There is a summary of accident analysis of several European countries, where we can read that of the 48000 fatally injured people in road traffic accidents in 1992, 13000 people were killed in accident with trucks involved, about 7000 were car occupants and 4200 of them were killed in car-to-truck frontal collisions.In the same time, in 1994, a collaboration in France between Renault VI (truck manufacturer) and INRETS has begun. The research program set up is based on a experimental design to determine the effect of the vehicle masses, the overlap and the closing speed and the effect of the Front Under run Protection Device on mechanical and biomechanical characteristics. This experimental design is presented which is also analysed and made available to use as a valid Front Under run Protection Device for trucks. Design and Optimization of Front Underrun Protection Device      Dr. T. Ramamohan Rao1 , A. Rama Krishna, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 8, Issue 2 (Jul. – Aug. 2013), PP 19-25 www.iosrjournals.org                                                                                                                                         Conclusions:  Head on collision contribute significant amount of serious accidents which causes driver fatalities. The car safety performances can work effectively by providing FUPD to the heavy trucks. The trucks with UPD can reduce the car driver fatalities by 40 % In India, for Front Under-run Protection Device, IS 14812:2005 regulation is required in for the trucks to meet the safety requirement to protect under running of the passenger car. In above said design, the maximum displacement of FUPD bar is limited to 179mm hence it meet the requirements as per IS 14812:2005. But this needs to be confirmed with physical testing in future. The virtual simulation is tool which can be used to avoid or reduce the physical testing of mechanical systems and components. Overall effect of this is cost saving and same is done with FUPD analysis. As per above results optimized model is safe, more strength and low weight mode suits the best suggested design. Weight reduction achieved by optimization result is 6%, compared to base third Model and displacement is about 5% and Stress is 6%.Finally we conclude that the optimized model results are less than the third design model. By this we can say that optimized front under run protection device is selected. Front under run protection is achieved less weight, less displacement and less stress so that for the passenger who is sitting in the car having high safety by placing this optimized model. We can suggest to automobile industries to keep this type of Front Underrun Protection Device to truck, busses etc which saves the life of passenger with less injury.
  15. Investigating the (length) constraints imposed by the Front Underrun Protection Regulation CONCLUSIONS: Crashes involving an underrun are likely to be severe because a car’s structural strength and passive safety systems – such as crumple zones – are unlikely to confer their full safety benefit. Many trucks/trailers are fitted with some form of underrun protection, however few trucks are equipped to fully minimise the possibility of an underrun. As a passive safety device, underrun protection will not reduce the number of crashes involving trucks and lighter vehicles. However, they can ensure that crashes that do occur are less severe than they might otherwise have been. The economic benefit of this reduction in crash severity substantially exceeds the cost of fitting them to trucks, up to a cost of $1,000 for a package of underrun protection for the front, sides and rear of all trucks (the benefit also exceeds the costs for individual underrun devices). This benefit is accrued over a device lifetime of at least 15 years, and is higher for articulated trucks than for rigid trucks. Further work is needed to develop a minimum standard for underrun protection devices for each side of a truck/trailer combination. 

So. . . tell me again why it is that we do not have Front Underrun Protection on every truck in the United States!?!?!?!?!?!?!

Other posts on front override:

Front Override 008

Best Protection

Feds allow GM to sell recalled cars: Safety, I don’t think that word means what you think it means

Safety Advocacy, Truck Safety, ,

Feds criticized for allowing GM to sell recalled cars:

Consumer groups are criticizing federal regulators for allowing General Motors Co. to potentially sell unrepaired used cars that have been recalled.

The Center for Auto Safety said Friday a loophole in a recent decision by the Federal Trade Commission could allow GM to sell cars that have safety defects if drivers are notified about open recalls. . .

Tsk, tsk, tsk. . .when will the industry own up to their implicit part in the highway carnage that results from the improper handling of manufacturing defects?

11wjd2

Safety: I do not think that word means what you think it means.

You can say that Safety is a Priority. But when you are told that something which you produce is not safe and you do not do anything to change it, are you really making safety a priority? I say that you are giving a very serious matter lip service.

When an “accident” happens and you look the other way rather than getting to the bottom of it, then I say that it is making light of my daughters’ deaths.

When you point the finger at someone else to take the blame for the consequences, rather than acknowledge your own part, then I say that you have become a bigger part of the problem.

I say that you do not care about providing the best possible protection, and safety is most certainly not your priority.

Safety: I do not think that word means what you think it means.

Violence

Safety is not a priority 002

Let’s appoint a Traffic Safety Ombudsman to oversee this fiasco.

Speed Limiters: The Controversy of Speed Differentials Between Trucks & Cars

Safety Advocacy, Truck Safety, , , , ,

The DOT recently published a proposed rule to require “speed limiters” on trucks — meaning there would be technology on trucks to limit how fast they could run. There is, of course, controversy about this proposed safety measure.

See the proposed rule (NPRM) at this link: U.S. DOT Proposes Speed Limiters For Large Commercial Vehicles

The American Trucking Associations (ATA) supports it. Some major trucking companies already use them.

The Owner-Operator Independent Drivers Association (OOIDA) opposes it:  Among the various concerns the organization has are the possibility that truckers will speed more often in low-speed areas, such as construction zones, to make up time, and the potential for drivers to lose money because they couldn’t drive as many miles in a day. http://ht.ly/e2Hy303DTS0

According to Joel Stocksdale, Autoblog,

NHTSA’s proposal says vehicles with a gross vehicle weight rating of 26,000 pounds or more must be limited to 60, 65 or 68 mph. This would apply to both semi-trucks and buses. NHTSA explains that the amount of force a truck will exert in a crash goes up far more drastically than with cars because of the vehicle’s great mass; hence, a lower speed limit with more seriously impact safety. US Transportation Secretary Anthony Foxx summed it up saying, “This is basic physics.” The organization also said that requiring limiters could also save over $1 billion in fuel each year.

I have corresponded with one independent truck owner-operator, Jeff Halling (and Linda, his wife–a truck driver team), about this safety issue (among others). This is what he says,

  • Personally Linda and I think this is a terrible idea. Not because we want to drive 80 miles an hour but because it totally eliminates our advantage of getting out of a situation if we have to speed up a little bit. Every credible study that has ever been conducted says traffic flows better when everyone is running the same speed. Several states have actually increased the truck speed to coincide with that of cars. Illinois and Arkansas being the most recent. Folks driving cars generally drive anywhere from 5 to 10 to 15 miles an hour above the posted limit. Trucks stuck at 65 will create major rear-end hazards. Not to mention the incredible traffic jams and road rages that will increase dramatically. The only way speed limiters will work is if all vehicles have them and we both know that’ll never happen. Very interested to see what the report says this week.
  • Can you imagine how this will affect the Move Over Law. I’m running down the interstate stuck at 65 cars are running 80 and 85 miles an hour. An emergency vehicle is on the shoulder in front of me what do I do. If I move over it’s guaranteed rear-end crash. If I slow down to 40 miles an hour which is what they recommend another possibility of rear-end crash. Just not a good idea.
  • I can say this though. If this law does pass we definitely need to get stronger rear end guards on trailers. Because rear-end crashes will go up ten fold.

Jeff and his wife (they are a trucking team) recently had a good conversation, about truck safety concerns, with an Idaho DOT vehicle inspector while they were being inspected. This is what he told them:

  • While we never touched on the subject of speed limiters he did say he did not like speed differentials. Although we got the impression he wanted to lower the limit for cars not raise it for trucks. Makes sense everybody drives too damn fast.

In fact, I found a September 2004 Federal Highway Administration (FHWA) article on research related to this topic: The Safety Impacts of Differential Speed Limits on Rural Interstate Highways . They study the impact of Uniform Speed Limits (USL) and Differential Speed Limits (DSDL). Here are a couple of quotes from that article:

  • A 1974 study by Hall and Dickinson showed that speed differences contributed to crashes, primarily rear end and lane change collisions.
  • Table 1 shows that a higher proportion of car-into-truck and truck-into-car crashes occurred in USL States, except for rear end crashes where more car-into truck collisions happened in the DSL group.
  • A study by Garber and Gadiraju conducted in 1991 compared crash rates in the adjacent States of Virginia (DSL) and West Virginia (USL).(3) The increase in the posted speed limit for trucks to 105 km/h (65 mi/h) did not result in a significant increase in fatal, injury, and overall accident rates. There was, however, some evidence that the DSL may increase some types of crash rates while reducing others.

It will be some time before every car is equipped with crash avoidance technology, so cars rear-ending trucks will continue to be a problem and underride deaths will still be a problem until the underride regulation is drastically improved.

And, even with the crash avoidance technology, what will be the result of high speed differentials? Will the cars truly avoid colliding with the truck? Will the trucking industry be required to protect against underride at higher speed collisions than what is currently proposed: 35 mph?

Here is a previous post which I wrote on speed limiters last spring:

See why truckers oppose Speed Limiters & why others promote them #VisionZero strategy needed

How is it that I, as a self-made (Ha! like I had a choice) safety advocate, am waffling on this purported safety measure? Do these things ever get a truly comprehensive discussion around the table?

Talkin together

Yet one more traffic safety issue which could perhaps be more effectively negotiated with the help of a National Traffic Safety Ombudsman. . . just sayin’.

UPDATE, February 26, 2017: