This last year, Jerry wrote to numerous trailer manufacturing companies asking them to voluntarily step up their underride guard standards. We got some positive response and stirred up interest in companies to which he also wrote who purchase trailers–enlightening them as well. One of the manufacturers, Great Dane, invited us to tour their Research & Design Center on June 25.
Of course, we weren’t the only ones frustrated with the inaction on what seems to be a drastically-needed change. Earlier this year, when we took the petitions to DC in May, we had met with the Insurance Institute for Highway Safety (IIHS). At that time, they put it like this: It is safer to run into a brick wall than into the back of a truck. Yet, seemingly, nothing was being done about it.
Over the course of time, in communications with IIHS, it had finally become clear to me just why that statement is true and why it didn’t seem to be understood by some in the trucking industry. I had read last fall, in a newscast which quoted Jeff Sims from the TTMA, that some thought that “too rigid” guards might cause more of a problem. (http://www.theindychannel.com/news/call-6-investigators/underride-guards-metal-barriers-on-back-of-large-trucks-often-fail-to-protect-drivers ) That didn’t make a lot of sense to me, especially considering our accident in which Caleb and I survived and AnnaLeah and Mary did not due to underride.
It turns out that, when the current federal standards were going through the lengthy process of being developed, there was some discussion that there might be a chance that the guards could be “too rigid”–so that strength had to be balanced with energy absorption. But, since then, technology has been developed to create “crush zones” in cars–effectively protecting the occupants in a crash, but not so effectively if underride occurs because then the crash technology is not allowed to do its thing.
What I found interesting, this morning, was that when I researched the history of airbags (part of that crash technology: http://web.bryant.edu/~ehu/h364proj/sprg_97/dirksen/airbags.html ), I discovered that they were first required to be installed starting in 1998—the very year that the current federal underride guard standards were required to be implemented (see the history of federal rulemaking on underride guards: http://tinyurl.com/phlaqon ). In effect, those underride guard standards were obsolete/ineffective/out-of-date as soon as they were implemented–only apparently no one was even aware of that unfortunate situation.
Happily, NHTSA has now acknowledged that they agree with us that the rear guards need to be improved, and, on top of that, IIHS told us that 5 out of the 7 companies which failed their 2013 narrow overlap test are in various stages of redesigning their guard. I sure hope that, even now, engineers across the world are wracking their brains and communicating with one another to come up with the best possible protection for us all. Could be we are getting somewhere with this problem…
Too late for AnnaLeah and Mary, but maybe just in time for someone else.
We have just gone over a hurdle–a very important hurdle which has set the ball rolling in the pursuit of improved standards for more effective, life-saving underride guards.
But I am reminded of what the track & field event called The Hurdles is really like. Webster’s defines hurdle like this:
” :one of a series of barriers to be jumped over in a race
the hurdles : a race in which runners must jump over hurdles
I ran the hurdles when I was in high school. I have a scar on my knee from the cinder track to prove it (now lost amid the scars from the truck crash). What we have to remember is that going over one hurdle is not enough. Once you have successfully gone over one, you have to keep in rhythm and go after the next, and the next, and…always keeping focused on staying the course until the end.
This is what the Federal Register posting says at the end: “The agency notes that its granting of the petition submitted by Ms. Karth and the Truck Safety Coalition does not prejudge the outcome of the rulemaking or necessarily mean that a final rule will be issued. The determination of whether to issue a rule will be made after study of the requested action and the various alternatives in the course of the rulemaking proceeding, in accordance with statutory criteria.” https://www.federalregister.gov/articles/2014/07/10/2014-16018/federal-motor-vehicle-safety-standards-rear-impact-guards-rear-impact-protection
On top of Wednesday’s good news. . .we heard earlier this week that — according to the Insurance Institute for Highway Safety — 5 out of the 7 trailer manufacturing companies which did not pass the IIHS narrow overlap crash test in 2013 (i.e., the rear underride guard did not hold up when a car crashed into it at the outer edge of the horizontal bar) are in some stage of “redesigning their guards to improve their crash performance.”
IIHS would “like to be able to conduct new tests demonstrating the improvements,” and are “hopeful that this approach can result in meaningful changes even before an upgraded standard from NHTSA, which could still take years to implement.”
At 1:01 p.m. today, Jerry and I received an email from David Friedman, Acting Administrator of the National Highway Traffic Safety Administration (NHTSA), as a follow up to our petition for improved underride guards.
Drowsy driving can be a problem for all of us. It is not just that you could fall asleep while driving but that your ability to react in emergency situations is impaired. It can happen to you when you least expect it. Not only that but you can be the victim of someone else’s drowsy driving any time you get into your car.
Drowsy truck drivers are especially hazardous because their job puts them on the road (in a monstrous piece of metal) for most of their working hours.
If I could do it, I would re-create the efforts of MADD–only instead of DWI, the target would be DWF (Driving While Fatigued).
A study by researchers in Australia showed that being awake for 18 hours produced an impairment equal to a blood alcohol concentration (BAC) of .05, and .10 after 24 hours; .08 is considered legally drunk.
Unfortunately, many people do not look upon drowsy driving as a serious problem. Perhaps if you knew that you were intoxicated, you might hand your keys to someone else to help you get home safely. Why would you choose to be safe in one case and not the other?
Many crashes are caused by drowsy drivers, because there is often little or no attempt to stop a collision. Crash investigators often notice the absence of skid marks or other signs of braking; this may be evidence of microsleep .
The thoughts below are also expressed in this YouTube video:
I find myself in the unenviable position of speaking up on behalf of all travelers on the road who are vulnerable and could—when they least expect it—become the next victim of an underride crash.
Jerry and I had the opportunity, on June 25, to tour the Research & Design Center of Great Dane, a trailer manufacturer. As their guests, we were able to spend the entire morning hearing about what they are doing with regard to quality control and safety, including underride guards which they voluntarily produce to meet or even exceed Canadian standards—thus surpassing current U.S. federal standards. We were able to ask questions and share our concerns about the inadequate federal standards for underride guards (otherwise known as rear impact guards).
We are perhaps better suited to ask those questions than just about anyone. After all, we had two daughters die because the car they were in rode under the back of a semitrailer.
It was an informative day. And we heard what seemed to be genuine comments that, “Cost is not a factor,” and, “Safety is important to us,” and, “We are not competitive about safety.” But what we did not see was a tangible plan to carry out their verbal commitment to create the best possible underride protection.
Now, it is understandable, amid the multitude of demands and the tyranny of the urgent, that—without a ready solution, in fact, one which would require time and money to develop—this problem has not been given much attention. But, if those who bear responsibility for making sure that this problem gets solved (one way or another) had lost two of their beloved children—or any other loved one—I can guarantee you that they would have moved heaven and earth to find a way to prevent underride.
What makes it even more distressing is that there are many individuals and organizations, who truly seem concerned about safety, including the National Highway Traffic Safety Administration (NHTSA), the Insurance Institute for Highway Safety (IIHS), and the trailer manufacturers. Yet, from what I can see, very little communication has taken place to move this problem forward from point A (guards that fail and result in death and/or horrific injuries) to Point B (coming up with a better design that will provide the best protection possible).
Great Dane, one of the major trailer manufacturers, observed that they passed all but one of the quasi-static crash tests—the narrow overlap. Great Dane also noted that their guard appeared to perform better on the full overlap test than Manac’s (which was the only company to pass all three tests in 2013). So Great Dane does not want to make a change which will strengthen one section of their guard but weaken another section. That’s understandable.
So, tell me: Why aren’t we getting anywhere? What will it take for an improved design to be researched and developed?
IIHS has done extensive quasi-static crash tests as well as analysis of Large Truck Crash information, and they are, in fact, champing at the bit—hoping to do further testing as improvements are made. Yet, we are told, Great Dane has not yet seen the details of their previous crash test results.
Great Dane, one of the major trailer manufacturers, tells us that safety is a priority to them. They even told us that they want to know how they can petition NHTSA to improve the underride guard standards. But the unfortunate reality is that there is not yet a new design; there is no improved guard. And Great Dane represents perhaps 12% of the market. What about the rest of the trailer manufacturers; when will they have a design which will produce safer guards?
On our trip home from Savannah to Rocky Mount, North Carolina, Jerry and I rehashed the morning’s events. We spent considerable time observing the many trailers which we saw on the road, and I took numerous photos of the various designs and conditions of the underride guards.
While at Great Dane, Jerry had made a few suggestions for improving the guard design. He suggested putting foam in the hollow horizontal bar. Another idea he put forth was to install panels with airbags to the existing guard—providing an additional barrier/energy absorption solution. Whether with these ideas or something else, surely, a more effective design can be created.
So, in trying to process what we learned at the meeting, I kept thinking over and over: Could an independent work group of qualified individuals, such as an engineering school, take on the challenge of creating such a design—which could then be tested by IHHS, proposed to NHTSA to aid in defining improved rear impact guard specifications, and provided to all trailer manufacturers? Could we do some kind of crowd funding or grant proposal to obtain the necessary funds to support such an endeavor? Could we perhaps even approach the Truck Trailer Manufacturers Association (TTMA) and ask them to seek contributions from their members for such a project?
Is cost truly not a factor? Is safety really a priority and not a competitive matter? Is it possible to improve the communication necessary to prevent more unnecessary deaths? Can we “sit down at the table together” and work this out?
Marianne Karth, June 26, 2014
(Note: I thought it was interesting that, in the photo above, a circle appeared around the very area of underride guard weakness about which we are concerned.)
See the testimony in May 2009 by the Insurance Institute for Highway Safety, in which they call for tougher underride guard standards and with an attachment of the history of federal rulemaking on underride guards (pasted below): http://tinyurl.com/phlaqon
The history of Federal rulemaking on truck underride guards:
1953 Interstate Commerce Commission adopts rule requiring rear underride guards on trucks and trailers but sets no strength requirements.
1967 National Highway Safety Bureau (NHSB), predecessor to the National Highway Traffic Safety Administration (NHTSA), indicates it will develop a standard for truck underride guards.
1969 NHSB indicates it will conduct research on heavy vehicle underride guard configurations to provide data for the preparation of a standard. In the same year the Federal Highway Administration publishes a proposal to require trailers and trucks to have strong rear-end structures extending to within 18 inches of the road surface.
1970 NHSB says it would be “impracticable” for manufacturers to engineer improved underride protectors into new vehicles before 1972. The agency considers an effective date of January 1, 1974 for requiring underride guards with energy-absorbing features as opposed to rigid barriers.
1971 National Transportation Safety Board (NTSB) recommends that NHTSA require energy-absorbing underride and override barriers on trucks, buses, and trailers. Later in the same year NHTSA abandons its underride rulemaking, saying it has “no control over the vehicles after they are sold” and “it can only be assumed that certain operators will remove the underride guard.” The Bureau of Motor Carrier Safety (BMCS), predecessor to the Federal Motor Carrier Safety Administration, considers a regulatory change that would prohibit alteration of manufacturer-installed equipment. This would nullify the major reason NHTSA cited for abandoning the proposed underride standard.
1972 NTSB urges NHTSA to renew the abandoned underride proposal.
1974 US Secretary of Transportation says deaths in cars that underride trucks would have to quadruple before underride protection would be considered cost beneficial.
1977 IIHS testifies before the Consumer Subcommittee of the US Senate Commerce Committee, noting that devices to stop underride have been technologically available for years. IIHS tests demonstrate that a crash at less than 30 mph of a subcompact car into a guard meeting current requirements results in severe underride. IIHS also demonstrates the feasibility of effective underride guards that do not add significant weight to trucks. IIHS petitions NHTSA to initiate rulemaking to establish a rear underride standard. The agency agrees to reassess the need for such a standard and later in the year announces plans to require more effective rear underride protection. BMCS publishes a new but weak proposal regarding underride protection.
1981 NHTSA issues a proposal to require upgraded underride protection.
1986 IIHS study reveals that rear guards designed to prevent cars from underriding trucks appear to be working well on British rigs.
1987 European underride standard is shown to reduce deaths caused by underride crashes.
1996 NHTSA finally issues a new standard, effective 1998.
I would like to do what I can to make a bridge between those who study truck safety issues, the trucking industry, and the regulators. It seems to me that it would help if we would all take a deep breath, not get defensive, and work really hard to understand all of the factors involved in “truck safety” and make sure that the roads are as safe as possible.
Specifically, I would like to do my part in clearing up some possible confusion about underride guards on large trucks. Two aspects: the impact of rigidity and the type of trucks which need to have them.
In the fall of 2013, I read an article online written by an investigative reporter about the inadequacy of current standards for underride guards. It included some quotes from the trucking industry and one in particular caught my attention and—because of what happened in our crash—caused me consternation. It didn’t make sense:
“— Response from trucking, trailer industries —
If the NHTSA creates new standards, it could be expensive for the trucking and trailer industries, and some argue tougher guards are not even the answer.
‘This type of accident usually involves serious driver error, so the Truck Trailer Manufacturers Association notes first that the rules already in place to prevent these accidents must be followed, including regulations against speeding or driving while impaired or distracted,’ said Jeff Sims, TTMA president, in an emailed statement to WRTV. ‘Proper maintenance of vehicle lighting equipment is also critical, both for passenger vehicle headlights and trailer tail lights and reflective tape.”‘
Sims argued that more rigid guards could lead to more deaths and more significant injuries.
While that may have been true at one time, it definitely no longer is the case. Due to advances in technology, cars have become much more crash-worthy, i.e., they are better able to absorb the energy of a crash and protect the passengers.
Notice—in direct contrast to the quote above—what the Insurance Institute for Highway Safety (IIHS) said in their March 2011 Status Report on underride guards (written two years prior to that 2013 quote from the trucking industry):
“Meanwhile, the passenger vehicle fleet has changed dramatically since NHTSA wrote the standards. Regulators then were concerned that ‘overly rigid guards could result in passenger compartment forces that would increase the risk of occupant injuries even in the absence of underride.’ The agency also recognized the need for balancing energy absorption with guard strength because ‘the more the guard yields, the farther the colliding vehicle travels and the greater likelihood of passenger compartment intrusion.’
“Underride crashes can be catastrophic for people in passenger vehicles that run into the backs of heavy trucks. The steel guards on the backs of big rigs are supposed to stop smaller vehicles from sliding underneath trailers, but a new Institute analysis of real-world crashes indicates that too often rear guards intended to prevent underride buckle or break away from their trailers — with deadly consequences. To understand how this happens, the Institute ran a series of crash tests and discovered that guards meeting federal safety standards can fail in relatively low-speed crashes….
‘Cars’ front-end structures are designed to manage a tremendous amount of crash energy in a way that minimizes injuries for their occupants,’ says Adrian Lund, Institute president. ‘Hitting the back of a large truck is a game changer. You might be riding in a vehicle that earns top marks in frontal crash tests, but if the truck’s underride guard fails — or isn’t there at all — your chances of walking away from even a relatively low-speed crash aren’t good.‘” http://www.iihs.org/iihs/sr/statusreport/article/46/2/1
Another area of concern is that the current federal standards allow for certain types of large trucks to be exempt from these underride regulations. IIHS has indicated that this is a big mistake.
“Many of the cases of severe underride involved trucks and trailers exempt from underride-related safety standards. More than half of the trucks in the study weren’t required to have guards, although many had them anyway. The two largest exempt groups were trailers with rear wheels set very close to the back of the trailer and straight trucks (single-unit trucks with a cab and cargo body on one chassis). Dump trucks represented a particularly hazardous category of straight truck. They accounted for about one-third of the straight trucks but half of all the straight truck crashes involving severe or catastrophic underride.” http://www.iihs.org/iihs/sr/statusreport/article/46/2/1
How much of the opposition to change in safety standards is due to a misunderstanding of the factors involved? It is very distressing to me that somebody could die as a result.
Support the Booker-Blumenthal Amendment to Stop Tired Trucking
Booker-Blumenthal Amendment Will Strike Dangerous Language in Collins Amendment That Would Weaken Truck Driver Hours of Service Rule
The Collins amendment would weaken the 34-hour rest period or “restart,” and:
Dramatically increase the allowable driving hours of truck drivers from the current average of about 70 hours a week to more than 80 hours a week. This is equivalent to adding an additional work day to the work week of a truck driver.
Allow shippers and supervisors to once again push drivers to work an average work week of up to 82 hours every week. This is double the normal work week of the average American worker and without any overtime pay or compensation.
Ignore a scientific study required by MAP-21 and conducted by the FMCSA to evaluate the 34-hour rest period provision. This study showed:
“Having at least two nighttime periods from 1 a.m. until 5 a.m. in the restart break helps to mitigate fatigue as measured both objectively and subjectively. This constitutes evidence in support of the efficacy of the new restart rule” (FMCSA, Report to Congress (2014)).
The quality of night-time sleep is far superior to sleep obtained during the day-time period. The FMCSA study confirmed the findings of hundreds of peer-reviewed studies on rest among night shift workers in numerous industries, and the conclusion is the same and significant. The natural circadian cycle favors sleeping at night.
This week, the Senate will vote on the Appropriations Bill. Please call or email your Senators today, and urge them to support the Booker-Blumenthal amendment to strike the Collins Amendment language that weakens the HOS rule. The recent tragic truck crash in New Jersey is just one example of the devastation that occurs when a driver, behind the wheel of an 80,000 pound truck, falls asleep or is inattentive due to fatigue.
TAKE action now:
Please call your Senators ASAP and urge them to:
SUPPORT THE BOOKER-BLUMENTHAL AMENDMENT TO STOP TIRED TRUCKING
Strike Senator Collins Amendment That Would Weaken the HOS Rule Restart
Truck Driver Fatigue is a Serious and Deadly Problem
Talking Points:
We urge you to strike the Collins amendment. This dangerous amendment will exacerbate truck driver fatigue, and increase dangers on our highways.
STRIKE THE COLLINS AMENDMENT
Truck driver fatigue has been recognized as a major safety concern and a contributing factor to fatal truck crashes for over 70 years.
Every year, on average, 4,000 people die in truck crashes and about 100,000 more are injured at a cost of at least $87 billion, a large number of them due to driver fatigue.
FMCSA studies reveal that 65% of truck drivers report they often or sometimes feel drowsy while driving and nearly half admit they fell asleep while driving in the previous year.
Truck driving is consistently listed as one of the top ten most dangerous jobs in the U.S. In 2011, fatalities among large truck occupants increased 20 percent, and by another 9 percent in 2012.
DO NOT DE-FUND, REVISE OR REPLACE THE HOS RULE
The current HOS Rule will:
Prevent approximately 1,400 crashes each year — saving 19 lives and avoiding 560 injuries;
Provide $280 million in annual savings from fewer crashes and $470 million in annual savings from improved driver health (i.e., reduced mortality).
SUPPORT THE BOOKER – BLUMENTHAL AMENDMENT TO STOP TIRED TRUCKING
Urge your Senator to Support the Booker – Blumenthal Amendment
The public health and safety community, law enforcement, the Trucking Alliance, and labor jointly support the Booker – Blumenthal amendment to Stop Tired Trucking.
This amendment will strike the Collins language to suspend the restart provisions, and will retain the CMV Driver Restart Study instead of a roll back on safety regulation.
The CMV Driver Restart Study directs DOT to conduct a peer-reviewed study of truck driver fatigue with specific deadlines based on objective data produced by electronic logging devices (ELDs) that will be installed in 2015.
DON’T BELIEVE THE HYPE
The current hours of service rule DOES NOT:
Restrict a driver from driving at night. In fact, the current rule places no restrictions on when a truck driver must drive. Unless a driver is absolutely maxing out their driving time and trying to drive more than the 60 or 70 hours currently permitted, there is also no restriction on when they have to take a break. Moreover, the rule does not specify when that driver must go back on the road after the break.
Add More Trucks to the road. Changes to the requirements for rest periods do not have any effect on the amount of freight shipped.
Every minute and a half of every day, there is a large truck crash.
SAY NO TO MORE TIRED TRUCKERS WORKING EVEN LONGER WORK WEEKS!
“…Driving while fatigued is comparable to driving drunk, only there is not the same social stigma attached. Like alcohol, fatigue affects our ability to drive by slowing reaction time, decreasing awareness and impairing judgment. Driving while sleep impaired is a significant issue, and is no longer tolerated. Legislation {in Canada} is beginning to change by handling collisions cause by a fatigued driver as seriously as alcohol-impaired crashes.”
Maybe, here in our country, we need a different, less-fragmented approach to solving the problem of truck driver fatigue–one that would bring together Public Health (Driving While Fatigued is a public health issue), Labor (truck drivers need to be paid and scheduled differently), and Transportation (the many factors that go into monitoring our transportation system–including CDL programs, technology, insurance, & safety measures like underride guards) experts. Let’s get the States to work together on this, too, so that the solutions which are created can be more effective through consistency and enforcement.
Let’s face it: we can’t get along without the trucking industry, so let’s make it the best it can be!
“Our current consumer driven economy is driven by our ability to offer a wide choice of competing products with wide scale or ‘intensive’ distribution. Consumers take for granted the choices available whether for a ‘commodity’ such as milk or high value products such as electronics. Store direct delivery and delivery of Internet purchases would not be possible without the trucking industry….
Our freight transportation system enables consumers to enjoy the availability of goods which are not produced in their immediate locale because of climate or soil conditions, the lack of raw materials, utilities, or labor, or the cost of production. Such a system allows consumers a choice of goods which would not otherwise be available….
One of the challenges of the motor carrier industry is to maintain tightly scheduled transit times to meet customer requirements….If you don’t believe transportation is important, just ask Etoys.com or KidsRUs.com. Better still, ask Santa Claus who operates the most efficient transport we have ever seen.” http://www.fhwa.dot.gov/planning/freight_planning/archive/weart.cfm
Last year, DOT was given the authority to study the question of raising the minimum liability insurance for truckers. (In our case, some of the insurance money from our settlement is still tied up because so many stakeholders wanted a portion of the pot.)
Now, members of the U.S. Senate and House have been asked to introduce and vote on amendments to legislation which would undermine this authority and cause a setback in attempts to more adequately cover the costs of truck crashes.
Minimum insurance requirements have not been increased once in thirty years, and should be increased immediately for medical care cost inflation. Families, like ours, should not have to cover the uninsured damages resulting from truck crashes.
Furthermore, at the same time, members of the House and Senate have also been asked to back legislative amendments which would suspend some of the Hours of Service (HOS) rules which were put into place last summer—until further study can be done. The suspension of the HOS provisions would allow truck drivers to increase their work week to 80+ hours and would increase truck driver fatigue.
Both of these actions are being taken (reportedly backed by the trucking industry) at the last minute when legislators are getting ready to vote on the budget, and both will have a negative impact on truck safety. 2 steps forward, 3 steps back
When I asked if this flurry of opposition was par for the course, I was told that it is particularly well-organized and aggressive.
Expect to hear soon about how you can help halt these actions. We do not want them to undermine 2 out of the 3 improvements which we asked for with our “AnnaLeah & Mary Stand Up for Truck Safety Petition!”
For more details about these two legislative amendments, go here: